Garapan Apple terbaru untuk mendapatkan tempat no. 1 di bidangnya membuat gadget teknologi saat ini belum terkalahkan, palingan banyak imitasi Made in China…. berikut gambar konsep New iPhone 4G

Aplikasi iQuran Pro menawarkan para pengguna al-Quran komplit dalam bahasa Arab dengan berbagai terjemahan khususnya bahasa Indonesia. Banyak fitur yang dirancang khusus untuk memudahkan membaca Al-qur’an di iPhone anda. iQuran di lengkapi juga dengan built in audio surah per surah dan ayat per ayat dengan  auto scroll.

Perangkat lunak ini support untuk iPhone dan iPod Touch menyediakan terjemahan dari beberapa negara yang bisa dipilih sebagai berikut :

• English Translation by M. Mohsin Khan
• Other English Translations: Yusuf Ali, Pickthal, Shakir
• English Translations: M. Mohsin Khan, Yusuf Ali, Pickthal, Shakir
• Transliteration
• French Translation
• German Translation
• Indonesian Translation
• Melayu Translation
• Spanish Translation
• Turkish Translation

Indeks inovatif Screen
Sebuah indeks yang  interaktif dengan beberapa kolom memberikan semua informasi yang Anda butuhkan. Surah Judul,  Cara pintas dan Juz semuanya dibuat secara terpisah.

Pembacaan
Anda bisa mendengarkan Qari favorit Anda dengan membaca ayat demi ayat dari surah yang ingin Anda dengar. iQuran akan secara automatis berputar dan mendengarkan suara Qari yang anda pilih surat demi surat dengan system auto scroll. Qari yang bisa di dengarkan adalah :

* Sheikh Husary (~417 MB)
* Sheikh Mishary Al-Afasy (~587 MB)
* Sudais & Saood Shuraim (~412 MB)
* Abu Bakr Ash-Shaatree (~522 MB)
* Abdul Basit (~574 MB)
* Ghamdi (~339 MB)
download iquran ipa
http://ia301516.us.archive.org/2/ite…n-iphone-full/

atau

http://rapidshare.com/files/206269870/iQuranPro-v23.ipa

Apabila anda ingin menginstall audio dan bukan download dari wifi iPhone, anda bisa download manual dari komputer Anda dengan connect memakai PC Suite atau SSH

AUDIO – Root/var/mobile/applications iquran documents COPY

Sheikh Husary Audio (3 links )
Link1
Link2
Link3
6 Bacaan Sheikh Husary Mishary Rashed Al-Afasy Saood Shuraim Abu Bakr Ash Shatree Abdul Basit Ghamdi Audio mp3
Link1
Link 2
Link 3
Link 4
Link 5
Link 6
Link 7
Link 8
Link 9
Link 10
Link 11
Link 12
Link 13
Link 14

Step One
Create a folder on your desktop called Pwnage

Download RedSn0w from Here and place it in the Pwnage folder. Likewise, download the latest 3.1.2 firmware from below and place it in the same folder.
3.1.2 (3G): iPhone1,2_3.1.2_7D11_Restore.ipsw

Extract the RedSn0w application from the RedSn0w zip file to the Pwnage folder.

Step Two
Connect your iPhone to the computer and launch iTunes.

Select your iPhone from the list of devices on the left. Now hold down shift and click the Restore button. Restore is preferred as it won’t create any wasted space on your iPhone.

Navigate to the Pwnage folder on your desktop and select the firmware ipsw. Click the Open button to continue.

Step Three
Once iTunes has finished updating your iPhone to the desired firmware you may launch redsn0w.exe from the Pwnage folder on your desktop.

Step Four
Once RedSn0w opens click the Browse button

Step Five
Select the firmware ipsw we placed in the Pwnage folder on our desktop then click Open

Step Six
Once the firmware has been verified click the Next button to continue.

Step Seven
From this window you can select the jailbreak options you would like. If you have already pwned your device check the Already pwned option.

Verbose boot displays detailed information on boot of your device and is generally only needed by developers and advanced users.

Make sure Cydia is selected. For this tutorial we will also select Custom boot logo and Custom recovery logo.

When you click to select each custom logo option a dialog window will appear asking you to select the image. Locate the image you would like to use then press the Open button.

*Remember the rules for boot logos are: RGB or Grayscale format with Alpha channel and dimension below 320×480. If you would like to use the iClarified ones they can be found here: Boot Logo, Recovery Logo

Click the Next button to continue

Step Eight
Please plug your iPhone into the computer and make sure its OFF then click the Next button

Step Nine
RedSn0w will now guide you through the steps to get into DFU mode.

Hold down both the Home button and the Power button for 10 seconds.

Release the Power button and continue holding the Home button until RedSn0w detects the device.

Step Ten
Your iPhone will now reboot

Step Eleven
RedSn0w will then begin uploading the new RAM Disk and Kernel.

Step Twelve
Once this is complete you will be notified that RedSn0w is done. Click the Finish button. After your iPhone finishes rebooting (5 minutes or so), it will be jailbroken with Cydia on the SpringBoard.

Perlu anda ketahui bahwa untuk iPhone 2G ada 2 (dua) file  bootloader yang harus di download dan tools yang mendukung untuk unlock iphone anda :
- BL 3.9
- BL 4.6
Pwnage 3.1.5, download  disini.

Jangan lupa untuk donload firmware iPhone 3.1.3 :
3.1.3 (2G): iPhone1,1_3.1.3_7E18_Restore.ipsw
Pake  Firefox untuk download firmware diatas !!!

Langkah Siji (satu)
Buatlah folder yang khusus untuk file/tool unlock iphone  anda seperti di bawah ini.

Langkah Loro (dua)
Double click atau buka aplikasi yang bergambar nanas  :  PwnageTool dmg.

Kemudian pindahkan atau oper ke  Pwnage folder dan langsung jalankan.

Click Ok jika ada pesan warning.

Langkah Telu (3)
Pastikan anda memilih icon Expert Mode pada menu diatas.

Langkah papat (4)
Pilih salah satu Icon iPhone atau iPod, bila anda memilih salah satunya automatis akan tercentang rumput hijau. Untuk melanjutkan silakan click tombol panah biru di bawah ini.

Langkah Lima (5)
Selanjutnya anda akan masuk tahap ” Browse for IPSW” yang intinya mamasukan file IPSW firmware 3.1.3 untuk 2G yang anda donwload.

Jika sudah ketemu file IPSWnya pilih dan click file tersebut dan akan muncul seperti gambar dibawah ini. Untuk melanjutkan click tanda panah biru dibawah ini.

Langkah Nam (6)
Jangan bingung langsung aja Click General dan untuk melanjutkan click tanda panah biru di bawah.

General setting memungkinkan Anda untuk menentukan ukuran partisi. Centang  Activate the Phone dan Centang  Enabled baseband update. Klik tombol panah biru di bawah ini.

Nah sekarang kita ada  Bootneuter settings, klik/centang  Neuter bootloader, Unlock baseband, dan  Auto-Delete BootNeuter.app. Untuk melanjutkan klik panah biru di bawah!!.

Menu Cydia settings yang memungkinkan Anda untuk membuat paket sehingga Anda tidak perlu menginstal secara manual yang diperlukan nanti.

Klik Select packages kemudian klik  tombol Refresh untuk menapilkan package yang tersedia. Double klik paket yang anda inginkan untuk didownload ke paket anda.

Centang paket yang anda pilih kemudian untuk melanjutkan Klik tnda panah biru di bawah.

Sekarang kita berada di menu  Custom Packages Settings yang menapilkan custom IPSW. Biarkan kita lanjut….. klik tanda panah biru di bawah

Menu Custom logos settings memungkinkan Anda untuk menambahkan gambar Anda sendiri sebagai logo boot( gambar yang akan di tampilkan bila anda menghidupkan iphone). Klik tombol Browse untuk memilih logo dan Pemulihan Boot logo.

Ukuran yang diperlukan untuk gambar : RGB atau format Grayscale dengan Alpha saluran dan dimensi 320×480. Jika Anda ingin menggunakan iClarified yang mereka dapat ditemukan di sini: Boot Logo, Recovery Logo

lanjut……. klik tombol panah biru lagi.

langkah Pitu (7)
Sekarang anda siap untuk membangun Firmware untuk unlock iphone anda, Click Build dan klik tombol panah biru untuk melanjutkan.

Langkah (8)
Jika ini adalah pertama kalinya melakukan hal ini, Anda akan diminta untuk meng-upload BL 3,9 dan 4,6 file. Ketika diminta untuk mencari web, klik No.

Klik Yes

Pilih file yang sudah tersimpan di folder.

lakukan sama dengan yang diatas .

Langkah Songo (9)
Setelah keduanya ditemukan. Anda akan diminta untuk menyimpan kustom Anda. Ipsw file. Simpan ke folder Pwnage pada desktop.

Langkah sepuluh (10)
IPSW kustom Anda sekarang sedang dibangun. Silakan tunggu sampai 10 menit.

Jika Anda diminta memasukkan password Administrator dan klik tombol OK.

Ketika diminta jika iPhone telah pwned sebelumnya, Klik No memungkinkan untuk mengembalikan yang lebih menyeluruh.

Anda akan diminta untuk mematikan perangkat. Pastikan terhubung ke port USB.

Langkah Solas (11)
Siap untuk mengikuti petunjuk sekarang. Akan meminta Anda untuk menahan tombol rumah dan tombol power selama 10 detik. Kemudian, Anda akan harus melepaskan tombol power dan tahan tombol home selama 10 detik untuk masuk DFU.

If you fail, it will show you a message. Click Yes. Unplug the iPhone from the USB. Turn it off, then turn it back on. Plug it back into the USB and turn off the iPhone when prompted.

When done correctly, Pwnage 3.1.5 will display a message telling your that it successfully entered DFU mode. iTunes will also pop-up.

Step Twelve
In iTunes, hold the Alt/Option key and click Restore.

Step Thirteen
Navigate to the Pwnage folder on your desktop using the dialog window that appears. Select the custom IPSW that was created (iPhone1,1_3.1.2_7D11_Restore.ipsw_Custom_Restore.ipsw) and click the Open button.

Step Fourteen
Once the restore has completed, it will restart your iPhone. The phone will then launch BootNeuter.app to unlock your device.

Please allow 5 minutes for this to complete. Your iPhone will restart once completed.

Tutorial cara unlock iphone 2G firmware 3.1.2 dengan menggunakan redsnow versi windows :

Step One
Create a folder called Pwnage on your desktop.

Download the following files and place them in the Pwnage folder you just created:
- RedSn0w
- BL 3.9
- BL 4.6
- 3.1.2 (2G):iPhone1,1_3.1.2_7D11_Restore.ipsw

Extract the RedSn0w application from the zip file to the Pwnage folder.

Step Two
Connect your iPhone to the computer and launch iTunes.

Select your iPhone from the list of devices on the left. Now hold down shift and click the Restore button. Restore is preferred as it won’t create any wasted space on your iPhone.

Navigate to the Pwnage folder on your desktop and select the firmware ipsw. Click the Open button to continue.

Step Three
Once iTunes has finished updating your iPhone to the desired firmware you may launch redsnw0w.exe from the Pwnage folder on your desktop.

Step Four
Once RedSn0w opens click the Browse button

Step Five
Select the firmware ipsw we placed in the Pwnage folder on our desktop then click Open

Step Six
Once the firmware has been verified click the Next button to continue.

Step Seven
From this window you can select the jailbreak options you would like. If you have already pwned your device check the Already pwned option.

Verbose boot displays detailed information on boot of your device and is generally only needed by developers and advanced users.

Make sure the Cydia and Unlock options are selected. For this tutorial we will also select Custom boot logoand Custom recovery logo.

When you click to select each custom logo option a dialog window will appear asking you to select the image. Locate the image you would like to use then press the Open button.

*Remember the rules for boot logos are: RGB or Grayscale format with Alpha channel and dimension below 320×480. If you would like to use the iClarified ones they can be found here: Boot Logo, Recovery Logo

Click the Next button to continue

Step Eight
We will know need to set the location of our bootloader files.

Click Browse and select the 3.9 bootloader file from the Pwnage folder on your desktop .

Click Browse and select the 4.6 bootloader file from the Pwnage folder on your desktop.

Click the Next button to continue.

Step Nine
Please plug your iPhone into the computer and make sure its OFF then click the Next button

Step Ten
RedSn0w will now guide you through the steps to get into DFU mode.

Hold down both the Home button and the Power button for 10 seconds.

Release the Power button and continue holding the Home button until RedSn0w detects the device.

Step Eleven
Your iPhone will now reboot

Step Twelve
RedSn0w will then begin uploading the new RAM Disk and Kernel.

Step Thirteen
Once this is complete you will be notified that RedSn0w is done. Click the Finish button. After your iPhone reboots (5 minutes or so), it will run BootNeuter then be unlocked and jailbroken with Cydia on the SpringBoard.

You should Know the differences between blackra1n and Redsn0w

*It uses our original Pwnage bootrom exploit for iPhone 2G, iPhone 3G, and iPod 1G. (Because it’s a bootrom exploit, it can’t be fixed by Apple without a new hardware release.) Note that redsn0w 0.9 does use the USB exploit for iPhone 3GS and iPod 2G running 3.1.2, but that exploit will be fixed in Apple’s next FW release.

*It offers custom logos and verbose boot

*It installs Cydia without needing a separate download
*It’s not as fast (but redsn0w handles more variations )

What’s different if I have a late-model device

If you have a late-model iPhone 3GS, or if you have an iPod touch 2G whose serial number begins with “MC”, then you are currently restricted to “tethered” rebooting. That means you need to connect your device to a computer to complete the boot after a reset. Also, these devices cannot have custom logos.

redsn0w will ask you whether or not you fit in this category when used with the iPhone 3GS or iPod touch 2G. If you have a late-model device and don’t give redsn0w the correct answer, you will likely need to do a system restore to recover from the mistake.

To do a tethered boot after your late-model device resets for some reason, either run redsn0w again and select “Just boot tethered right now”, or run blackra1n.
What if I’m already jailbroken?

If you’re already jailbroken, redsn0w can still be used to change your boot logos, revert back to the stock logos, or switch verbose booting on and off. By selecting “Already Pwned” you can bypass the steps normally needed to enter the jailbroken state.
Is it safe?

The Windows version has been tested by small groups of volunteers on IRC and our blog since mid-January. That being said, this is still a beta and if things go wrong you may have to do a system restore…so make sure your data is synced before trying the beta.
Beta feedback

Here is the Redsn0w guide

Redsn0w is an easy to use, multi-platform, multi-device jailbreaking and unlocking tool for the iPhone 2G 3G 3GS and also the iPod touch (first and second generation). Just like Blackra1n, Redsn0w jailbreak the 3.1.2 firmware already installed on your device, so before you proceed, you must have installed the original 3.1.2. Note that late-model iPhone 3GS and iPod touch 2G whose serial number begins with “MC” are currently restricted to “tethered” rebooting. That means you need to connect your device to a computer to complete the boot after a reset. Also, these devices cannot have custom logos.

Download Redsn0w 0.9

Windows Version
Mac Version

Step 1. If you have not already, download the original firmware 3.1.2 on the desktop of your computer. In case of unlocking an iPhone EDGE, to be sure you also download the two files Bootloader: bl39.bin and bl46.bin

Step 2. Connect the iPhone / iPod to PC or Mac

Step 3. Launch the application and click on Browse. Select the original firmware 3.1.2 from the desktop of your computer and then click on Next

Step 4. It will start an automatic process (and very fast) which will be downloaded and patched the kernel.

Following a new screen will appear. Cydia is already selected.

*Install Cydia: Main reason why we jailbreak iPhone.
*Verbose Boot: Will allow you to replace the boot with the apple (boot chart) with the verbose mode, or the ability to see everything that is loaded at startup;
*Custom Boot Logo: Bore with classic apple startup, change with your face or whatever else. Size should be 320X480.
*Recovery Custom Logo: A logo that will replace the classic Recovery;
*Already Pwned: Select if you want to install the verbose boot or change the boot and recovery logos on an iPhone on which has already been to jailbreak;

Step 5. Now you will be asked to put the iPhone in Recovery Mode (iPhone 3GS) or DFU (the other iPhone / iPod).

How to put your iPhone in recovery mode :

1.Turn the device completely off and disconnect it from cable/dock.
2.Hold down the home button.
3.While holding down the home button connect to a computer with a cable (easiest) or dock.
4.Keep holding down the home button until you see a connect-to-iTunes screen You are now in recovery mode.
5.To escape Recovery Mode and power the phone off simply hold down power and home buttons for ten seconds.

How to put your iPhone in DFU mode :
1.Connect your iPhone to your computer.
2.Turn iPhone off.
3.Hold power and home together for 10 seconds (exactly).
4.Release power but keep holding home until the computers beeps (observed on a PC) as a USB device is recognized.
5.A few seconds later iTunes should detect your iPhone.
6.If the Restore Logo is present on the screen, you are in Recovery Mode, not DFU.

Step 6. Once you are in recovery mode/dfu mode redsn0w will start another automated process to complete the Jailbreak.

Apple have released OS 3.1.3 for for iPhone 3GS, iPhone 3G, iPhone 2G, iPod touch 1G, iPod touch 2G, and iPod touch 3G

Updated Features
Fix for iPhone 3GS battery level reporting
Fix for app crashes on launch
Fix for app crashes while using Japanese Kana Keyboard

And this time I do not paste the Download links You should Check thisNote.

Note: DO NOT update to 3.1.3 if you have a jailbroken iPhone / iPod Touch. There isn’t a jailbreak/unlock for this firmware yet

UltraSn0w .92 was posted by MuscleNerd and uses an extra 10 lines of code to fix the carrier name. It is available on the normal repo666.ultrasn0w.com Cydia repository.

You can find instructions on how to unlock your iPhone using UltraSn0w. Remember to use UltraSn0w you must be on the 04.26.08 baseband.

[Update]: The carrier fix has been confirmed for: USA, Thailand, Austria, Trinidad, Germany, China, Kuwait, Serbia, Poland, France, Nigeria, Egypt, Pakistan, Ireland, UK, Turkey, Sweden, Switzerland, Malaysia, Hungary, The Netherlands, Bahamas, Jamaica, India, Israel, Belgium, Canada, Portugal

How to: Jailbreak & Unlock iPhone 3.1.2 Firmware with blackra1n RC3 (with blacksn0w)
Please refer to the guide posted here to unlock, and here to jailbreak your iPhone 3G and 3GS on 3.1.2 firmware.

Fix #1: Reset Network Settings
This fix comes right from geohot himself. Those of you who are having issues with WiFi failing to connect to a nearby hotspot or network should reset your network settings by following three simple steps.
Step 1: On your iPhone 3G and 3GS, navigate to Settings –> General –> Reset –> Reset Network Settings.
Step 2: A dialog will prompt you with “Reset Network Settings” button as shown in the screenshot below.

Step 3: Hit this button and turn off your iPhone by holding down power button on the top and then slide to turn off your phone. Now turn on your iPhone by holding down the power button on the top again until you see the Apple logo.

Resetting your network setting will fix your WiFi problem temporarily. The problem will come back once you have rebooted your iPhone again. You will have to reset your network settings pretty much every time you reboot your iPhone.

Fix #2: Install Push Fix App

Push Fix app from Cydia is used to fix Push Notifications on hacktivated iPhone 3.1.x firmware. I found out that installing this app also fixes all issues caused by blacksn0w related to WiFi, Youtube app and GPS along with Push Notifications on hacktivated iPhone’s. Follow the steps below to install Push Fix app:

Step 1: First reset your network settings as mentioned in Fix #1 above to bring back WiFi temporarily. We need WiFi to install Push Fix app from Cydia.

Step 2: Now start “Cydia” on your iPhone. Touch on “Manage” tab on the bottom and then on “Sources” as seen in the screenshot below:

Step 3: Touch on “Edit” and then on “Add”. You will be prompted to enter a url source as seen in the screenshot below. Type “http://cydia.iphoneil.net” and touch on “Add Source”.

Cydia will now automatically update your sources by following a series of automated steps.

Step 4: After installation is completed. Search for “Push Fix” in Cydia and install this application. This app will automatically fix Push Notification System on your unlocked and jailbroken iPhone.

Step 5: Restart you iPhone.

Credit for Fix #2 goes to our reader Keneth_C. It should fix all issues related to WiFi, Youtube and GPS which some of you might have encountered when unlocking your iPhone with blacksn0w.

Blacksn0w will be available via Blackra1n RC3, in order to unlock iPhone 3G/3Gs 3.1.2 you need to first upgrade to firmware 3.1.2 and then download Blackra1n for windows/mac and click on make it ra1n. once your iPhone reboots you will see “blackra1n” app click on it You will see “sn0w”. Install this, and enjoy your unlocked iPhone.

Features of Blackra1n RC3

1. Hacktivation support,

2. 15 second speed improvement,

3. Tiger+PPC support,

4. and installation of the latest blackra1n.app

Download Blackra1n RC3 to Jailbreak & Unlock iPhone 3.1.2.

Here is what’s important to note:

* BlackSn0w unlocks baseband 05.11.07
* BlackSn0w enables internet tethering
* BlackSn0w is for iPhone 3G and 3GS users only

Those of you with iPhone 2G should follow the guide posted here for unlocking and jailbreaking 3.1.2 firmware. Here is a complete step by step guide on how to unlock iPhone 3G and 3GS running 3.1.2 firmware on 05.11.07 baseband with blacksn0w.

NOTE: Those of you who have already installed blackra1n RC1 or RC2 should just run the the app and touch on “ra1n”, which has been added now instead of “Icy”. This will upgrade blackra1n to RC3. Now simply follow the instruction written in Step 5 below to unlock your iPhone.
with 3.1.2 firmware on 05.11.07 baseband.

How to unlock iPhone 3.1.2 with blackSn0w?

* As mentioned above, if you previously jailbroke your iPhone using BlackRa1n and you kept the blackra1n.app on it, then run BlackRa1n. The Icy icon should be replaced by the “ra1n” option. Select “ra1n” to upgrade BlackRa1n to RC3. After upgrading, run BlackRa1n and you should see the “sn0w” option. Just select “sn0w” and it will unlock your iPhone.
* If you were waiting to update to 3.1.2 or if your iPhone was stuck locked, then download BlackSn0w, run it, reboot, and choose the “sn0w” option from the BlackRa1n.app.
* If your iPhone was previously jailbroken using PwnageTool or if you deleted the BlackRa1n.app from your iPhone, BlackSn0w will be added to Cydia later during the day.

Step 1: Download the latest version of iTunes if you haven’t already.(Download link)

Step 2: Update/restore to the original (stock) iPhone firmware 3.1.2 on your iPhone by using the latest version of iTunes.

Download iPhone OS 3.1.2 for iPhone 2G
Download iPhone OS 3.1.2 for iPhone 3G
Download iPhone OS 3.1.2 for iPhone 3GS

Step 3: You will now have to jailbreak your iPhone running on iPhone 3.1.2 firmware with blackra1n RC3. Follow the complete step by step guide posted before in order to jailbreak your iPhone 3G/3GS with blackra1n RC3.
Step 4: Once you are done with the jailbreak, start the blackra1n app and you should now see “sn0w” option as can be seen from the screenshot below:

Step 5: Now simply touch on “sn0w” to install blacksn0w on your iPhone. This will automatically unlock your iPhone 3G/3GS running 3.1.2 firmware on 05.11.07 baseband.

blacksn0w will soon be available on Cydia too. If you have upgraded to 3.1.2 firmware with PwnageTool 3.1.4, then you will soon be able to unlock your iPhone with 05.11.07 baseband with ease. Stay tuned for more updates on this!

Ini adalah bukti dari keberhasilan Geohat mengunlock Iphone dengan Firmware 3.1.2